prof. dr hab. inż. Andrzej Jacek Teter
Dyscyplina:
inżynieria mechaniczna
Artykuły z 2024 (2)
1. Non-linear stability of isotropic stiffened composite channels under compression / Andrzej Teter, Zbigniew Kołakowski // Thin-Walled Structures.- 2024, vol. 197, s. 1-10 [MNiSW: 140]
2. Susceptibility versus flexural stiffness in the stability of hybrid laminate columns with a rectangular cross section for a 1D model / Andrzej Teter, Zbigniew Kołakowski // Composite Structures.- 2024, vol. 345, s. 1-12 [MNiSW: 140]
Artykuły z 2023 (1)
1. Global buckling of axially functionally graded columns with variable boundary conditions / Andrzej Teter, Zbigniew Kołakowski // Composite Structures.- 2023, vol. 304, nr Pt 2, s. 1-12 [MNiSW: 140]
Artykuły z 2022 (4)
1. Imperfection sensitivity of FGM cylindrical shells under compression / Zbigniew Kołakowski, Andrzej Teter // Composite Structures.- 2022, vol. 291, s. 1-7 [MNiSW: 140]
2. Interactive buckling of wide plates made of Functionally Graded Materials with rectangular stiffeners / Andrzej Teter, Zbigniew Kołakowski // Thin-Walled Structures.- 2022, vol. 171, s. 1-14 [MNiSW: 140]
3. Modified methods for estimation of local bifurcational loads including an effect of moderate geometrical inaccuracies / Zbigniew Kołakowski, Andrzej Teter // Composite Structures.- 2022, vol. 279, nr 1, s. 1-12 [MNiSW: 140]
4. Using experimental non-contact methods to discuss on a damage process of laminated thin-walled L-columns under ends shortening / Jarosław Gawryluk, Andrzej Teter // Composite Structures.- 2022, vol. 289, s. 1-15 [MNiSW: 140]
Artykuły z 2021 (5)
1. Analytical model and energy harvesting analysis of a vibrating slender rod with added tip mass in three-dimensional space / Marek Borowiec, Marcin Bocheński, Grzegorz Litak and Andrzej Teter // The European Physical Journal Special Topics.- 2021, vol. 230, nr 18-20, s. 3581-3590 [MNiSW: 70]
2. Coupled buckling of hybrid thin-walled channel sections under compression in the elastic range / Zbigniew Kołakowski, Andrzej Teter // SSRN Electronic Journal.- 2021, vol. 2021, s. 1-6 [MNiSW: 5]
3. Eigenproblem Versus the Load-Carrying Capacity of Hybrid Thin-Walled Columns with Open Cross-Sections in the Elastic Range / Zbigniew Kołakowski and Andrzej Teter // Materials.- 2021, vol. 14, nr 13, s. 1-29 [MNiSW: 140]
4. Experimental-numerical studies on the first-ply failure analysis of real, thin walled laminated angle columns subjected to uniform shortening / Jarosław Gawryluk, Andrzej Teter // Composite Structures.- 2021, vol. 269, s. 1-10 [MNiSW: 140]
5. Influence of Hole Localization on Local and Global Dynamic Response of Thin-Walled Laminated Cantilever Beam / Marcin Bocheński, Jarosław Gawryluk and Andrzej Teter // Materials.- 2021, vol. 14, nr 23, s. 1-13 [MNiSW: 140]
Artykuły z 2020 (5)
1. Buckling and limit states of thin-walled composite columns under eccentric load / Hubert Dębski, Patryk Różyło, Andrzej Teter // Thin-Walled Structures.- 2020, vol. 149, s. 1-11 [MNiSW: 140]
2. Catastrophic Influence of Global Distortional Modes on the Post-Buckling Behavior of Opened Columns / Andrzej Teter, Zbigniew Kołakowski // Materials.- 2020, vol. 13, nr 15, s. 1-16 [MNiSW: 140]
3. Dynamic control of kinematically excited laminated, thin-walled beam using macro fibre composite actuator / Jarosław Gawryluk, Andrzej Mitura, Andrzej Teter // Composite Structures.- 2020, vol. 236, s. 1-7 [MNiSW: 140]
4. How to determine a value of the bifurcation shortening of real thin-walled laminated columns subjected to uniform compression? / Andrzej Teter Zbigniew Kołakowski, Jacek Jankowski // Composite Structures.- 2020, vol. 247, nr 112430, s. 1-11 [MNiSW: 140]
5. Proportional control of cantilever laminated beam using macro fiber composite actuator / Jarosław Gawryluk, Andrzej Mitura, Andrzej Teter // AIP Conference Proceedings.- 2020, vol. 2239, nr 1, s. 1-5 [MNiSW: 5]
Artykuły z 2019 (7)
1. Approximate bifurcation load of short thin-walled laminate plate structures with imperfection / Andrzej Teter, Zbigniew Kołakowski, Wojciech Smagowski and Hubert Dębski // AIP Conference Proceedings.- 2019, vol. 2078, nr 1, s. 1-7 [MNiSW: 5]
2. Dynamic response of a composite beam rotating at constant speed caused by harmonic excitation with MFC actuator / Jarosław Gawryluk, Andrzej Mitura, Andrzej Teter // Composite Structures.- 2019, vol. 210, s. 657-662 [MNiSW: 140]
3. Effect of load eccentricity on the buckling and post-buckling states of short laminated Z-columns / H. Dębski, A. Teter // Composite Structures.- 2019, vol. 210, s. 134-144 [MNiSW: 140]
4. On using load-axial shortening plots to determine the approximate buckling load of short, real angle columns under compression / Andrzej Teter, Zbigniew Kołakowski // Composite Structures.- 2019, vol. 212, s. 175-183 [MNiSW: 140]
5. On using load–axial shortening plots to determine approximate buckling load of real plate structure / Zbigniew Kołakowski, Andrzej Teter and Wojciech Smagowski // AIP Conference Proceedings.- 2019, vol. 2060, nr 1, s. 1-9 [MNiSW: 5]
6. Transverse inhomogeneity of laminated cylindrical panel influence on post-buckling behaviour / Andrzej Teter, Zbigniew Kołakowski, Radosław J. Mania // Composite Structures.- 2019, vol. 225, s. 1-9 [MNiSW: 140]
7. Use of an active element for dynamic controlof a thin-walled laminated beamwith kinematic excitation / Jarosław Gawryluk, Andrzej Mitura, Andrzej Teter // Archive of Mechanical Engineering.- 2019, vol. 66, nr 3, s. 379-387 [MNiSW: 70]
Artykuły z 2018 (7)
1. Design solutions for improving the lowest buckling loads of a thin laminate plate with notch / Katarzyna Falkowicz, Hubert Dębski, Andrzej Teter // AIP Conference Proceedings.- 2018, vol. 1922, nr 1, s. 1-10 [MNiSW: 15]
2. Effect of Blades Settings on Rotor Dynamics / Andrzej Mitura, Jarosław Gawryluk, Andrzej Teter and Jerzy Warmiński // Machine Dynamics Research.- 2018, vol. 42, nr 2, s. 73-79 [MNiSW: 14]
3. Effect of load eccentricity on the buckling of thin-walled laminated c-columns / Paweł Wysmulski, Andrzej Teter, Hubert Dębski // AIP Conference Proceedings.- 2018, vol. 1922, nr 1, s. 1-8 [MNiSW: 15]
4. Experimental and numerical studies of a cracked thin-walled box-beams / Andrzej Teter, Jarosław Gawryluk, Marcin Bocheński // Composite Structures.- 2018, vol. 202, s. 807-817 [MNiSW: 40]
5. Influence of the piezoelectric parameters on the dynamics of an active rotor / Jarosław Gawryluk, Andrzej Mitura, Andrzej Teter // AIP Conference Proceedings.- 2018, vol. 1922, nr 1, s. 1-8 [MNiSW: 15]
6. Non-linear stability and load-carrying capacity of thin-walled laminated columns in aspects of coupled buckling and coupled stiffness submatrix / Andrzej Teter, Radosław J. Mania, Zbigniew Kołakowski // Composite Structures.- 2018, vol. 192, nr 15, s. 72-81 [MNiSW: 40]
7. Numerical modelling of thin-walled Z-columns made of general laminates subjected to uniform shortening / Andrzej Teter, Zbigniew Kołakowski // AIP Conference Proceedings.- 2018, vol. 1922, nr 1, s. 1-11 [MNiSW: 15]
Artykuły z 2017 (8)
1. Effect of selected elements of the coupling stiffness submatrix on the load-carrying capacity of hybrid columns under compression / Andrzej Teter, Radosław J. Mania, Zbigniew Kołakowski // Composite Structures.- 2017, vol. 180, s. 140-147 [MNiSW: 40]
2. Experimental and numerical study of the buckling of composite profiles with open cross section under axial compression / Patryk Różyło, Andrzej Teter, Hubert Dębski, Paweł Wysmulski, Katarzyna Falkowicz // Applied Composite Materials.- 2017, vol. 24, nr 5, s. 1251-1264 [MNiSW: 30]
3. Influence of mechanical couplings on the buckling behaviour of thin-walled plates made of general laminates under compression / Andrzej Teter, Zbigniew Kołakowski // Composite Structures.- 2017, vol. 166, s. 68-76 [MNiSW: 40]
4. Modal analysis of laminated “CAS” and “CUS” box-beams / Jarosław Gawryluk, Marcin Bocheński, Andrzej Teter // Archive of Mechanical Engineering.- 2017, vol. 64, nr 4, s. 441-454 [MNiSW: 15]
5. Modal interactions and time delay control of a parametrically excited nonlinear composite column / Jerzy Warmiński, Andrzej Teter // Procedia IUTAM.- 2017, vol. 22, s. 91-98 [MNiSW: 15]
6. Non-linear multi-mode buckling of non-symmetric FML/FGM thin-walled columns with open cross-sections under compression / Andrzej Teter, Radosław J. Mania, Zbigniew Kołakowski // Composite Structures.- 2017, vol. 167, s. 38-49 [MNiSW: 40]
7. Numerical and experimental studies on the rotating rotor with three active composite blades / Andrzej Mitura, Jarosław Gawryluk, Andrzej Teter // Eksploatacja i Niezawodność-Maintenance and Reliability.- 2017, vol. 19, nr 4, s. 571-579 [MNiSW: 25]
8. Numerical and experimental studies on vibration based methods for detection of damage in composite beams / Emil Manoach, Jerzy Warmiński, Łukasz Kłoda, Andrzej Teter // Composite Structures.- 2017, vol. 170, s. 26-39 [MNiSW: 40]
Artykuły z 2016 (9)
1. Application of 3-D laser scanning vibrometer in determination of free vibration frequencies of composite plates with damage / Sylwester Samborski, Wojciech Smagowski, Andrzej Teter, Marek Chodurski // Solid State Phenomena.- 2016, vol. 240, s. 42-48
2. Coupled static and dynamic buckling modelling of thin – walled structures in elastic range review of selected problems / Zbigniew Kołakowski, Andrzej Teter // Acta Mechanica et Automatica.- 2016, vol. 10, nr 2, s. 141-149 [MNiSW: 14]
3. Experimental and numerical studies on the static deflection of the composite beam with the MFC element / Jarosław Gawryluk, Andrzej Mitura, Andrzej Teter // Mechanics and Mechanical Engineering.- 2016, vol. 20, nr 2, s. 97-108 [MNiSW: 12]
4. Experimental modal analysis of a rotor with active composite blades / Andrzej Teter, Jarosław Gawryluk // Composite Structures.- 2016, vol. 153, s. 451-467 [MNiSW: 35]
5. Influence of boundary conditions on the critical and failure load in the GFPR channel cross-section columns subjected to compression / Mariusz Urbaniak, Andrzej Teter, Tomasz Kubiak // Solid State Phenomena.- 2016, vol. 240, s. 212-217
6. Local buckling of thin walled column of square cross section made of in plane coupled laminate / Andrzej Teter, Damian Pasierbiewicz, Zbigniew Kołakowski // Mechanics and Mechanical Engineering.- 2016, vol. 20, nr 2, s. 129-141 [MNiSW: 12]
7. Local buckling, post-buckling and collapse of thin-walled channel section composite columns subjected to quasi-static compression / Hubert Dębski, Andrzej Teter, Tomasz Kubiak, Sylwester Samborski // Composite Structures.- 2016, vol. 136, s. 593-601 [MNiSW: 35]
8. Some aspects of dynamic coupled response of functionally graded thin-walled columns with square cross-sections under in-plane pulse compression / Zbigniew Kołakowski, Andrzej Teter // Journal of Theoretical and Applied Mechanics.- 2016, vol. 54, nr 2, s. 449-462 [MNiSW: 15]
9. Vibration based methods for damage detection in structures / Emil Manoach, Jerzy Warmiński, Łukasz Kłoda, Andrzej Teter // MATEC Web of Conferences.- 2016, vol. 83, s. 1-6 [MNiSW: 15]
Artykuły z 2015 (7)
1. Experimental investigation of failure process in compressed channel-section GFRP laminate columns assisted with the acoustic emission method / Tomasz Kubiak, Sylwester Samborski, Andrzej Teter // Composite Structures.- 2015, vol. 133, s. 921-929 [MNiSW: 40]
2. Influence of boundary conditions on the critical and failure load in the GFPR channel cross-section columns subjected to compression / Mariusz Urbaniak, Andrzej Teter, Tomasz Kubiak // Composite Structures.- 2015, vol. 134, s. 199-208 [MNiSW: 40]
3. Load carrying capacity of functionally graded columns with open cross-sections under static compression / Zbigniew Kołakowski, Andrzej Teter // Composite Structures.- 2015, vol. 129, s. 1-7 [MNiSW: 40]
4. Numerical and experimental studies on the limit state of fibre-reinforced composite columns with a lipped channel section under quasi-static compression / Hubert Dębski, Andrzej Teter // Composite Structures.- 2015, vol. 133, s. 1-7 [MNiSW: 40]
5. Numerical strength analysis of the load-bearing frame of a palletizing robot’s universal head / Marek Chodurski, Hubert Dębski, Sylwester Samborski, Andrzej Teter // Eksploatacja i Niezawodność-Maintenance and Reliability.- 2015, vol. 17, nr 3, s. 374-378 [MNiSW: 20]
6. Ocena wpływu warstw piezoelektrycznych oraz warunków brzegowych na zachowanie hybrydowych płyt kompozytowych o różnych układach warstw / Andrzej Teter, Jarosław Gawryluk // Biuletyn Wojskowej Akademii Technicznej.- 2015, vol. 64, nr 1, s. 103-125 [MNiSW: 7]
7. Static interactive buckling of functionally graded columns with closed cross-sections subjected to axial compression / Zbigniew Kołakowski, Andrzej Teter // Composite Structures.- 2015, vol. 123, s. 257-262 [MNiSW: 40]
Artykuły z 2014 (4)
1. A review on the mechanical behaviour of curvilinear fibre composite laminated panels / Pedro Ribeiro, Hamed Akhavan, Andrzej Teter, Jerzy Warmiński // Journal of Composite Materials.- 2014, vol. 48, nr 22, s. 2761-2777 [MNiSW: 30]
2. An influence of the d311 effect on the behavior of the cantilever beam-shaped piezoelectric activator made of two layers of PVDF with inverse polarity / Andrzej Teter, Jarosław Gawryluk, Jerzy Warmiński // Applied Computer Science.- 2014, vol. 10, nr 3, s. 23-33 [MNiSW: 6]
3. Numerical and experimental studies of compressed composite columns with complex open cross-sections / Hubert Dębski, Andrzej Teter, Tomasz Kubiak // Composite Structures.- 2014, vol. 118, s. 28-36 [MNiSW: 40]
4. On buckling collapse and failure analysis of thin-walled composite lipped-channel columns subjected to uniaxial compression / Andrzej Teter, Hubert Dębski, Sylwester Samborski // Thin-Walled Structures.- 2014, vol. 85, s. 324-331 [MNiSW: 35]
Artykuły z 2013 (4)
1. Buckling and postbuckling behaviour of thin-walled composite channel section column / Hubert Dębski, Tomasz Kubiak, Andrzej Teter // Composite Structures.- 2013, vol. 100, s. 195-204 [MNiSW: 35]
2. Coupled dynamic buckling of thin-walled composite columns with open cross-sections / Andrzej Teter, Zbigniew Kołakowski // Composite Structures.- 2013, vol. 95, nr 1, s. 28-34 [MNiSW: 35]
3. Experimental investigation of channel-section composite profiles’ behavior with various sequences of plies subjected to static compression / Hubert Dębski, Tomasz Kubiak, Andrzej Teter // Thin-Walled Structures.- 2013, vol. 71, s. 147-154 [MNiSW: 35]
4. Influence of inherent material damping on the dynamic buckling of composite columns with open cross-sections / Zbigniew Kołakowski, Andrzej Teter // Mechanics and Mechanical Engineering.- 2013, vol. 17, nr 1, s. 31-41
Artykuły z 2012 (1)
Artykuły z 2011 (1)
1. Dynamic critical load based on different stability criteria for coupled buckling of columns with stiffened open cross-sections / Andrzej Teter // Thin-Walled Structures.- 2011, vol. 49, nr 5, s. 589-595
Artykuły z 2010 (2)
1. Application of different dynamic stability criteria in case of columns with intermediate stiffeners / Teter, A. // Mechanics and Mechanical Engineering.- 2010, vol. 14, nr 2, s. 339-349
2. Dynamic, multimode buckling of thin-walled columns subjected to in-plane pulse loading / Andrzej Teter // International Journal of Non-Linear Mechanics.- 2010, vol. 45, nr 3, s. 207-218
Artykuły z 2007 (1)
1. Static and dynamic interactive buckling of isotropic thin-walled closed columns with variable thickness / A. Teter // Thin-Walled Structures.- 2007, vol. 45, nr 10-11, s. 936-940
Artykuły z 2005 (1)
1. Buckling of thin-walled composite structures with intermediate sitffeners / Andrzej Teter, Zbigniew Kołakowski // Composite Structures.- 2005, vol. 69, nr 4, s. 421-428
Artykuły z 2004 (1)
1. Nonlinear analysis of experimental time series of a straight turing process / Litak Grzegorz, Rusinek Rafał, Teter Andrzej // Meccanica.- 2004, vol. 39, nr 2, s. 105-112
Artykuły z 2002 (1)
1. Surface quality of a work materials influence on the vibrations of the cutting process / J. Lipski, G. Litak, R. Rusinek, K. Szabelski, A. Teter, J. Warmiński, K. Zaleski // Journal of Sound and Vibration.- 2002, vol. 252, nr 4, s. 729-737
Artykuły z 2001 (1)
Jeżeli ta strona zawiera nieaktualne, błędne lub niekompletne dane prosimy o kontakt pod adresem oab@pollub.pl