Artykuły z 2024 (1)
1. Strength Parameters of Corrugated Cardboard and Corrugated Cardboard Joints / Anna Rudawska, Piotr Penkała, Daniel Gąska, Kacper Sawosz, Dana Stančeková // Advances in Science and Technology Research Journal.- 2024, vol. 18, nr 8, s. 333-340 [MNiSW: 100]
Artykuły z 2023 (3)
1. Identification of the Production of Small Holes and Threads Using Progressive Technologies in Austenite Stainless Steel 1.4301 / Dana Stančeková, Filip Turian, Michal Šajgalík, Mário Drbúl, Nataša Náprstková, Anna Rudawska, Miroslav Špiriak // Materials.- 2023, vol. 16, nr 19, s. 1-17 [MNiSW: 140]
2. Optimization of Threads Production on Thin – Walled Castings / Dana Stančeková, Jozef Mrázik, Anna Rudawska, Miroslava Ťavodová, Izabela Miturska-Barańska, Daniela Sršníková, Miroslav Špiriak // Manufacturing Technology.- 2023, vol. 23, nr 6, s. 1-11 [MNiSW: 70]
3. The analysis of the effect of assembly joints technology on the strength of adhesive joints of poly(methyl methacrylate) (PMMA) used in advertising elements: Assembly joints technology of PMMA / Anna Rudawska, Piotr Penkała, Bartosz Miszczuk, Dana Stančeková // Technologia i Automatyzacja Montażu = Assembly Techniques and Technologies.- 2023, vol. 120, nr 2, s. 3-10 [MNiSW: 70]
Artykuły z 2022 (1)
1. Mechanical Properties and Leak-Tightness of Polymeric Pipe Adhesive Joints / Anna Rudawska, Magd Abdel Wahab, Miroslav Müller and Dana Stančeková // Applied Mechanics.- 2022, vol. 3, nr 1, s. 64-77 [MNiSW: 5]
Artykuły z 2021 (3)
1. Comparative analysis of compressive strength of regenerative masses made from epoxy adhesive compounds / Jacek Ogrodniczek, Anna Rudawska, Miroslav Müller, Dana Stančeková // Technologia i Automatyzacja Montażu = Assembly Techniques and Technologies.- 2021, nr 2, s. 8-12 [MNiSW: 40]
2. Effect of the surface treatment on the strength of the single-lap adhesive joints / Elżbieta Doluk, Anna Rudawska, Dana Stančeková // Technologia i Automatyzacja Montażu = Assembly Techniques and Technologies.- 2021, nr 1, s. 18-22 [MNiSW: 40]
3. Influence of surface treatment on the strength of adhesive joints / Elżbieta Doluk, Anna Rudawska, Dana Stančeková, Jozef Mrázik // Manufacturing Technology.- 2021, vol. 21, nr 5, s. 1-9 [MNiSW: 70]
Artykuły z 2020 (6)
1. Comparision of the bearing rings deformation after heat treatment / Dana Stančekova, Anna Rudawska, Jozef Mrázik, Filip Turian // Manufacturing Technology.- 2020, vol. 20, nr 5, s. 677-683 [MNiSW: 70]
2. Evaluation of Surface Roughness after Actively Rotary Turning Method / Richard Joch, Jozef Pilc, Dana Stančeková, Izabela Miturska and Ingrid Görögová // Materials Science Forum.- 2020, vol. 994, s. 11-18 [MNiSW: 20]
3. Influence of the Assembly Method of Sleeve Joints on Their Strength / Anna Rudawska, Izabela Miturska, Magd Abdel Wahab, Dana Stančeková, Miroslava Ťavodová // Manufacturing Technology.- 2020, vol. 20, nr 5, s. 660-667 [MNiSW: 70]
4. Milling of Technical Ceramics ROCAR SiSiC / Dana Stančeková, Jozef Mrázik, Ingrid Görögová, Izabela Miturska, Peter Ščotka, Filip Turian // Manufacturing Technology.- 2020, vol. 20, nr 2, s. 250-256 [MNiSW: 70]
5. The Effect of the Surface Preparation Method on the Ultimate Strength of a Single Lap Adhesive Joints of Selected Construction Materials / Anna Rudawska, Izabela Miturska, Dana Stančeková // Technologia i Automatyzacja Montażu = Assembly Techniques and Technologies.- 2020, nr 4, s. 14-20 [MNiSW: 40]
6. The Strength of the Adhesive Joints of the Medium-Density Fireboards and Particle Boards with the PVC Film / Anna Rudawska, Dana Stančeková, Miroslav Müller, Tatiana Vitenko, Volodymyr P. Iasnii // Advances in Science and Technology Research Journal.- 2020, vol. 14, nr 1, s. 58-68 [MNiSW: 100]
Artykuły z 2019 (1)
1. The Implementations of Suitable Cutting Parameters by Grinding of Titanium VT9 with Impact on Surface Integrity / Dana Stančeková, Anna Rudawska, Miroslav Neslušan, Jozef Mrázik, Miroslav Janota // Manufacturing Technology.- 2019, vol. 19, nr 5, s. 855-859 [MNiSW: 70]
Artykuły z 2018 (6)
1. A choice of the optimum cutting ranges for cutting nozzles A-SD for selection of metallurgical material / Dana Stančeková, Anna Rudawska, Albert Kulla, Jana Petrů, Jozef Holubják // Advances in Science and Technology Research Journal.- 2018, vol. 12, nr 3, s. 106-113 [MNiSW: 10]
2. An impact of technological conditions on surface burning in grinding of the orbit / Dana Stančeková, Jozef Mrázik, Iwona Rybicka, Nataša Náprstková, Pavel Kraus // Advances in Science and Technology Research Journal.- 2018, vol. 12, nr 4, s. 19-27 [MNiSW: 10]
3. Analyses of calcium influence on the ALSi9CuMnNi alloy / Nataša Náprstková, Pavel Kraus, Jaromír Cais, Dana Stančeková, Izabela Miturska // Advances in Science and Technology Research Journal.- 2018, vol. 12, nr 3, s. 32-38 [MNiSW: 10]
4. Mechanical properties of hand-making polyester composites / Anna Rudawska, Mateusz Malczarski, Dana Stančeková, Magd Abdel Wahab, Vladimira Schindlerová // Advances in Science and Technology Research Journal.- 2018, vol. 12, nr 2, s. 112-120 [MNiSW: 10]
5. The application of grinding of ceramic materials / Dana Stančeková, Jana Petrů, Jaroslava Svobodova, Izabela Miturska, Sarka Molotova // Materials Science Forum.- 2018, vol. 919, s. 215-221 [MNiSW: 15]
6. The strength of traditional and self-pierced riveted joints / Anna Rudawska, Izabela Miturska, Dana Stančeková, Jacek Mucha // MATEC Web of Conferences.- 2018, vol. 244, s. 1-12 [MNiSW: 15]
Artykuły z 2017 (4)
1. Adhesive properties and adhesive joints strength of graphite/epoxy composites / Anna Rudawska, Dana Stančeková, Nadežda Čuboňova, Tatiana Vitenko, Miroslav Müller, Petr Valášek // Journal of Physics : Conference Series.- 2017, vol. 842, s. 1-9 [MNiSW: 15]
2. Comparative analysis of welded and adhesive joints strength made of acid-resistant stainless steel sheets / Izabela Miturska, Anna Rudawska, Piotr Pawlak, Dana Stančeková, Mateusz Chyra // Advances in Science and Technology Research Journal.- 2017, vol. 11, nr 4, s. 97-102 [MNiSW: 10]
3. Influence of selected cutting conditions on cutting forces / Augustín Görög, Dana Stančeková, Mária Kapustová, Ingrid Görögová, Izabela Miturska // Advances in Science and Technology Research Journal.- 2017, vol. 11, nr 1, s. 179-185 [MNiSW: 10]
4. The impact of selected technological and material parameters on the strength of adhesive steel sheets joints / Anna Rudawska, Katarzyna Głogowska, Tatiana Vitenko, Dana Stancekova, Nadežda Čuboňova, Dariusz Kasperek // Advances in Science and Technology Research Journal.- 2017, vol. 11, nr 2, s. 8-16 [MNiSW: 10]
Artykuły z 2016 (4)
1. Milling as a method of surface pre-treatment of steel for adhesive bonding / Anna Rudawska, Magdalena Reszka, Tomasz Warda, Izabela Miturska, Jakub Szabelski, Agnieszka Skoczylas, Dana Stancekova // Journal of Adhesion Science and Technology.- 2016, vol. 30, nr 23, s. 2619-2636 [MNiSW: 20]
2. Technical and organizational improvements of packaging production process / Anna Rudawska, Nadežda Čuboňova, Kamila Pomarańska, Dana Stancekova, Arkadiusz Gola // Advances in Science and Technology Research Journal.- 2016, vol. 10, nr 30, s. 182-192 [MNiSW: 10]
3. The visual method in quality assessment of single-lap adhesive joints / Anna Rudawska, Dana Stancekova, Józef Brzęczek // Advances in Science and Technology Research Journal.- 2016, vol. 10, nr 31, s. 109-118 [MNiSW: 10]
Artykuły z 2015 (1)
1. Identification of drilling of biocompatible materials based on titanium / Dana Stancekova, Jan Semcer, Anna Rudawska, Robert Cep // Manufacturing Technology.- 2015, vol. 15, nr 4, s. 699-704
Jeżeli ta strona zawiera nieaktualne, błędne lub niekompletne dane prosimy o kontakt pod adresem oab@pollub.pl