Zgadzam się
Nasza strona zapisuje niewielkie pliki tekstowe, nazywane ciasteczkami (ang. cookies) na Twoim urządzeniu w celu lepszego dostosowania treści oraz dla celów statystycznych. Możesz wyłączyć możliwość ich zapisu, zmieniając ustawienia Twojej przeglądarki. Korzystanie z naszej strony bez zmiany ustawień oznacza zgodę na przechowywanie cookies w Twoim urządzeniu.
The analysis of single-layer and multi-layer nitride coatings based on refractory metals V and Ta was conducted. The magnetron deposition based on direct current and targets of
the V and Ta with a purity of 99,995 % were used to create the coating samples. The coating de
position was performed in an atmosphere of Ar/N2 mixture at a substrate bias voltage from 0 to
150 V. The changes of the ratio flow Ar/N2 allowed to form an amorphous (a-TaN) and FCC crystalline (c-TaN) phase of the coating. The tribological tests of sin-gle-layer coatings based on
Ta showed the presence of chips and cracks at early stages of testing, for c-TaN typical abrasive wear mechanism. The heterostructure system a-TaN/c-TaN has a cohesive mechanism
of wear and better adhesion to the substrate, rather than single-layer coatings. An analysis of corrosion re-sistance of the nanostructured coating NV, deposited on a steel substrate RUS-3
at 400 °C was made. For the analysis of the corrosion resistance of the coating unused NV the method of electrochemical impedance spectroscopy technique in 3.5 % solution of NaCl was
used. The applied negative voltage to 150 V results to increasing coating hardness and elastic modulus, together with the pores, cracks and macro defects are formed on the coating surface that
leads to deterioration of corrosion resistance of the system.
