Investigations Into the Stability of Thin-Walled Composite Structures with Top-Hat Cross-Sections
Artykuł w czasopiśmie
MNiSW
100
Lista 2023
| Status: | |
| Autorzy: | Czajka Błażej |
| Dyscypliny: | |
| Aby zobaczyć szczegóły należy się zalogować. | |
| Rok wydania: | 2023 |
| Wersja dokumentu: | Drukowana | Elektroniczna |
| Język: | angielski |
| Numer czasopisma: | 3 |
| Wolumen/Tom: | 17 |
| Strony: | 311 - 316 |
| Impact Factor: | 1,0 |
| Web of Science® Times Cited: | 0 |
| Scopus® Cytowania: | 0 |
| Bazy: | Web of Science | Scopus |
| Efekt badań statutowych | NIE |
| Finansowanie: | The research was conducted under project no. 2021/41/B/ST8/ 00148 and financed by the National Science Centre, Poland. |
| Materiał konferencyjny: | NIE |
| Publikacja OA: | TAK |
| Licencja: | |
| Sposób udostępnienia: | Witryna wydawcy |
| Wersja tekstu: | Ostateczna wersja opublikowana |
| Czas opublikowania: | W momencie opublikowania |
| Data opublikowania w OA: | 25 czerwca 2023 |
| Abstrakty: | angielski |
| This paper presents a study of compressed thin-walled composite columns with an open cross-section. The tested specimens with a top-hat cross-section were made of CFRP material. Two arrangements of composite layers [0/-45/45/90]s and [90/0/90/0]s were compared. The paper focuses on the buckling phenomenon and the determination of the critical loads of the structure. It includes both numerical analyses using the finite element method (FEM) and validation on real specimens made using the autoclave technique. A comparison is made between the results obtained by both methods. The critical forces of the real specimens were determined using the P-wc3 approximation method. Both the evaluation of the buckling shape and the values of the critical forces showed a significant correlation between the experimental and numerical tests. This paper also compares the tested lay-ups. |
