Informacja o cookies

Zgadzam się Nasza strona zapisuje niewielkie pliki tekstowe, nazywane ciasteczkami (ang. cookies) na Twoim urządzeniu w celu lepszego dostosowania treści oraz dla celów statystycznych. Możesz wyłączyć możliwość ich zapisu, zmieniając ustawienia Twojej przeglądarki. Korzystanie z naszej strony bez zmiany ustawień oznacza zgodę na przechowywanie cookies w Twoim urządzeniu.

Publikacje Pracowników Politechniki Lubelskiej

MNiSW
140
Lista 2023
Status:
Autorzy: Pavlik Zbyšek, Záleská Martina, Pavlíková Milena, Pivák Adam, Lauermannová Anna-Marie, Lojka Michal, Jiříčková Adéla, Łagód Grzegorz, Jankovský Ondřej
Dyscypliny:
Aby zobaczyć szczegóły należy się zalogować.
Rok wydania: 2023
Wersja dokumentu: Drukowana | Elektroniczna
Język: angielski
Wolumen/Tom: 394
Numer artykułu: 132069
Strony: 1 - 12
Impact Factor: 7,4
Scopus® Cytowania: 4
Bazy: Scopus
Efekt badań statutowych NIE
Materiał konferencyjny: NIE
Publikacja OA: NIE
Abstrakty: angielski
This research concerns the analysis and application of extracted shale from mining waste at the Lubelski Węgiel „Bogdanka“ S.A. coal mine in Poland. Various analyses were performed on both raw and thermally activated forms of extracted shale, and then the thermally activated one was used as a partial cement substitute in a PCbased paste. In order to reduce the required additional energy, the activation temperature for the extracted shale was chosen to be 600 ◦C according to the simultaneous thermal analysis measurement. Chemical, mineralogical, physical, and morphological analyses, thermogravimetry, and pozzolanic activity tests of raw and thermally activated extracted shale were conducted. The Portland cement pastes containing either 10 wt%, 15 wt%, or 20 wt% of thermally activated extracted shale were compared to a reference plain cement paste. Cement pastes with the thermally activated extracted shale were studied in the fresh and also hardened state after 7, 28, and 90 days of setting. Furthermore, mechanical, structural, and microstructural properties were measured and compared with the reference. Simultaneous thermal analysis with a mass spectrometer (STA-MS), isothermal calorimetry, X-ray powder diffraction (XRD), and strength activity index (SAI) evaluation were used to assess the evolution and rate of the pozzolanic reaction. All the performed analyses confirmed the pozzolanic activity of the thermally treated extracted shale and its potential in cement industry applications. The extracted shale also acted partially as a microfiller. The use of calcined extracted shale reduced the porosity of the cement matrix and increased its flexural and compressive strength. For 90-day samples, a slight hindrance in the precipitation of final substances was observed as a result of different kinetics of hydration and pozzolanic reactions. Taking all of the results into consideration, the coal mining waste – calcined extracted shale – can find use as a partial cementitious substitute for up to 20 wt%.