dr hab. inż. Sylwester Samborski, prof. uczelni
Dyscyplina:
inżynieria mechaniczna
Artykuły z 2024 (2)
1. Determination of Hole Blocking Conditions for Perforated Sifting Surfaces / Serhii Kharchenko, Sylwester Samborski, Farida Kharchenko, Ihor Kotliarevskyi // Advances in Science and Technology Research Journal.- 2024, vol. 18, nr 5, s. 342-360 [MNiSW: 100]
2. Experimental tensile testing of the lap joint composite laminates supported with the acoustic emission and machine learning techniques / Rayane El Mohtadi, Jakub Rzeczkowski, Izabela Korzec-Strzałka, Sylwester Samborski, Francesco Aymerich, Aleksander Czajka // Composite Structures.- 2024, vol. 345, s. 1-15 [MNiSW: 140]
Artykuły z 2023 (5)
1. Application of the Acoustic Emission Technique for Damage Identification in the Fiber Reinforced Polymer Composites / Sylwester Samborski, Izabela Korzec // Advances in Science and Technology Research Journal.- 2023, vol. 17, nr 1, s. 210-221 [MNiSW: 100]
2. Experimental study of delamination process in elastically coupled laminates with the acoustic emission technique / Sylwester Samborski, Jakub Rzeczkowski, Izabela Korzec-Strzałka // Engineering Structures.- 2023, vol. 300, s. 1-11 [MNiSW: 140]
3. Identification of the Natural Frequencies of Oscillations of Perforated Vibrosurfaces with Holes of Complex Geometry / Serhii Kharchenko, Sylwester Samborski, Farida Kharchenko, Andrzej Mitura, Jakub Paśnik and Izabela Korzec // Materials.- 2023, vol. 16, nr 17, s. 1-22 [MNiSW: 140]
4. Numerical Study of the Natural Oscillations of Perforated Vibrating Surfaces with Holes of Complex Geometry / Serhii Kharchenko, Sylwester Samborski, Farida Kharchenko, Jakub Paśnik // Advances in Science and Technology Research Journal.- 2023, vol. 17, nr 6, s. 73-87 [MNiSW: 100]
5. Study of the influence of optical measurement of slope geometry in the working chamber for AISI 316L / Ondrej Mizera, Lenka Cepova, Jozef Tkac, Vieroslav Molnár, Gabriel Fedorko,Sylwester Samborski // Composite Structures.- 2023, vol. 321, s. 1-11 [MNiSW: 140]
Artykuły z 2022 (6)
1. A Study on Strength and Failure of Fabric Reinforced Polymer Composites / Izabela Korzec, Sylwester Sylwester Samborski, Tomasz Łusiak // Advances in Science and Technology Research Journal.- 2022, vol. 16, nr 2, s. 120-130 [MNiSW: 100]
2. A study on the FRP composite’s matrix damage resistance by means of elastic wave propagation analysis / Jakub Skoczylas, Mariusz Kłonica, Sylwester Samborski // Composite Structures.- 2022, vol. 297, s. 1-21 [MNiSW: 140]
3. Effects of Elastic Couplings in a Compressed Plate Element with Cut-Out / Katarzyna Falkowicz, Sylwester Samborski, Paolo S. Valvo // Materials.- 2022, vol. 15, nr 21, s. 1-14 [MNiSW: 140]
4. Experimental and Numerical Research of Delamination Process in CFRP Laminates with Bending-Twisting Elastic Couplings / Jakub Rzeczkowski and Sylwester Samborski // Materials.- 2022, vol. 15, nr 21, s. 1-14 [MNiSW: 140]
5. Experimental Determination of the Mode I Fracture Toughness in FRP Laminates with Hybrid Delamination Interfaces / Jakub Rzeczkowski, Sylwester Samborski, Katarzyna Prokopek // Advances in Science and Technology Research Journal.- 2022, vol. 16, nr 5, s. 129-135 [MNiSW: 100]
6. Influence of Physical and Constructive Parameters on Durability of Sieves of Grain Cleaning Machines / Serhii Kharchenko, Sylwester Samborski, Farida Kharchenko, Jakub Paśnik, Stepan Kovalyshyn, Kiril Sirovitskiy // Advances in Science and Technology Research Journal.- 2022, vol. 16, nr 6, s. 156-165 [MNiSW: 100]
Artykuły z 2021 (5)
1. A multilateral study on the FRP Composite’s matrix strength and damage growth resistance / Jakub Skoczylas, Sylwester Samborski, Mariusz Kłonica // Composite Structures.- 2021, vol. 263, s. 1-7 [MNiSW: 140]
2. Acoustic emission as a valuable technique used for monitoring polymer failures / Jakub Skoczylas, Sylwester Samborski, Mariusz Kłonica // Studia Universitatis Babeş-Bolyai : Engineering.- 2021, vol. 66, nr 1, s. 34-44 [MNiSW: 5]
3. Adaptation of Fracture Mechanics Methods for Quality Assessment of Tungsten Carbide Cutting Inserts / Sylwester Samborski, Jerzy Józwik, Jakub Skoczylas, Mariusz Kłonica // Materials.- 2021, vol. 14, nr 13, s. 1-13 [MNiSW: 140]
4. Materiały kompozytowe w polskim przemyśle lotniczym / Jakub Skoczylas, Sylwester Samborski, Mariusz Kłonica // Biuletyn Polskiego Towarzystwa Mechaniki Teoretycznej i Stosowanej.- 2021, vol. 2021, s. 99-110 [MNiSW: 5]
5. Mode III numerical analysis of composite laminates with elastic couplings in split cantilever beam configuration / Jakub Rzeczkowski, Jakub Paśnik, Sylwester Samborski // Composite Structures.- 2021, vol. 265, s. 1-7 [MNiSW: 140]
Artykuły z 2020 (7)
1. Analysis of mechanical properties of a lattice structure produced with the additive technology / Jozef Tkac, Sylwester Samborski, Katarina Monkova, Hubert Dębski // Composite Structures.- 2020, vol. 242, s. 1-8 [MNiSW: 140]
2. Effect of stiffness matrices terms on delamination front shape in laminates with elastic couplings / Jakub Rzeczkowski, Sylwester Samborski, Paolo S. Valvo // Composite Structures.- 2020, vol. 233, s. 1-9 [MNiSW: 140]
3. Experimental Investigation of Delamination in Composite Continuous Fiber-Reinforced Plastic Laminates with Elastic Couplings / Jakub Rzeczkowski, Sylwester Samborski and Marcelo de Moura // Materials.- 2020, vol. 13, nr 22, s. 1-17 [MNiSW: 140]
4. Laboratory and Numerical Analysis of Steel Cold-Formed Sigma Beams Retrofitted by Bonded CFRP Tapes / Ilona Szewczak, Katarzyna Rzeszut, Patryk Różyło and Sylwester Samborski // Materials.- 2020, vol. 13, nr 19, s. 1-14 [MNiSW: 140]
5. Progressive Failure Analysis of Thin-Walled Composite Structures Verified Experimentally / Patryk Różyło, Mirosław Ferdynus, Hubert Dębski and Sylwester Samborski // Materials.- 2020, vol. 13, nr 5, s. 1-15 [MNiSW: 140]
6. Stability and Load-Carrying Capacity of Thin-Walled FRP Composite Z-Profiles under Eccentric Compression / Hubert Dębski, Sylwester Samborski, Patryk Różyło and Paweł Wysmulski // Materials.- 2020, vol. 13, nr 13, s. 1-17 [MNiSW: 140]
7. Thermoplastic Composites and Their Promising Applications in Joining and Repair Composites Structures: A Review / João Pedro Reis, Marcelo de Moura and Sylwester Samborski // Materials.- 2020, vol. 13, nr 24, s. 1-33 [MNiSW: 140]
Artykuły z 2019 (5)
1. Experimental investigation of delamination onset and propagation in mechanically coupled composite laminates / Sylwester Samborski and Jakub Rzeczkowski // AIP Conference Proceedings.- 2019, vol. 2060, s. 1-7 [MNiSW: 5]
2. Experimental Study on Static and Dynamic Fracture Toughness of Cured Epoxy Resins / Jakub Skoczylas, Sylwester Samborski, Mariusz Kłonica // Advances in Science and Technology Research Journal.- 2019, vol. 13, nr 1, s. 122-127 [MNiSW: 100]
3. Mode I Interlaminar Fracture of Glass/Epoxy Unidirectional Laminates. Part I: Experimental Studies / Sylwester Samborski, Adrian Gliszczyński, Jakub Rzeczkowski and Nina Wiacek // Materials.- 2019, vol. 10, nr 12, s. 1-12 [MNiSW: 140]
4. Mode I Interlaminar Fracture of Glass/Epoxy Unidirectional Laminates. Part II: Numerical Analysis / A. Gliszczyński, S. Samborski, N. Wiacek and J. Rzeczkowski // Materials.- 2019, vol. 10, nr 12, s. 1-18 [MNiSW: 140]
5. The Application of Composite Materials in the Aerospace Industry / Jakub Skoczylas, Sylwester Samborski, Mariusz Kłonica // Journal of Technology and Exploitation in Mechanical Engineering - JTEME.- 2019, vol. 5, nr 1, s. 1-6 [MNiSW: 5]
Artykuły z 2018 (8)
1. Application of the CZM technique to delamination analysis of coupled laminate beams / Jakub Paśnik, Sylwester Samborski, Jakub Rzeczkowski // IOP Conference Series : Materials Science and Engineering.- 2018, vol. 416, s. 1-5 [MNiSW: 15]
2. Application of topological measures in estimation of reinforcing fibers distribution in composites / Piotr Wolszczak, Tomasz Sadowski, Sylwester Samborski // IOP Conference Series : Materials Science and Engineering.- 2018, vol. 416, s. 1-6 [MNiSW: 15]
3. Experimental investigation of mechanically coupled composite specimens in the ENF test configuration / Jakub Rzeczkowski, Sylwester Samborski, Jakub Paśnik // IOP Conference Series : Materials Science and Engineering.- 2018, vol. 416, s. 1-6 [MNiSW: 15]
4. Experimental verification of the DCB test configuration applicability to mechanically coupled composite laminates / Jakub Rzeczkowski, Sylwester Samborski, Jakub Paśnik // IOP Conference Series : Materials Science and Engineering.- 2018, vol. 416, s. 1-5 [MNiSW: 15]
5. Issues of direct application of fracture toughness determination procedures to coupled composite laminates / Sylwester Samborski, Jakub Rzeczkowski, Jakub Paśnik // IOP Conference Series : Materials Science and Engineering.- 2018, vol. 416, s. 1-5 [MNiSW: 15]
6. Numerical and analytical modeling of the End-Loaded Split (ELS) test specimens made of multi-directional coupled composite laminates / Sylwester Samborski, Paolo S. Valvo // AIP Conference Proceedings.- 2018, vol. 1922, nr 1, s. 1-8 [MNiSW: 15]
7. Numerical modeling and experimental testing of the DCB laminated composite beams with mechanical couplings / Sylwester Samborski, Jakub Rzeczkowski // AIP Conference Proceedings.- 2018, vol. 1922, nr 1, s. 1-6 [MNiSW: 15]
8. Prediction of delamination front’s advancement direction in the CFRP laminates with mechanical couplings subjected to different fracture toughness tests / Sylwester Samborski // Composite Structures.- 2018, vol. 202, s. 643-650 [MNiSW: 40]
Artykuły z 2017 (2)
1. Analysis of the end-notched flexure test configuration applicability for mechanically coupled fiber reinforced composite laminates / Sylwester Samborski // Composite Structures.- 2017, vol. 163, nr 1, s. 342-349 [MNiSW: 40]
2. On quantitative expression in fibrous composites based on an exemplary distribution of roving glass-fibers / Piotr Wolszczak, Tomasz Sadowski, Sylwester Samborski // Composites Part B-Engineering.- 2017, vol. 129, s. 66-76 [MNiSW: 45]
Artykuły z 2016 (6)
1. Application of 3-D laser scanning vibrometer in determination of free vibration frequencies of composite plates with damage / Sylwester Samborski, Wojciech Smagowski, Andrzej Teter, Marek Chodurski // Solid State Phenomena.- 2016, vol. 240, s. 42-48
2. Effect of a notch on impact resistance of the epidian 57/Z1 epoxy material after „thermal shock” / Mariusz Kłonica, Józef Kuczmaszewski, Sylwester Samborski // Solid State Phenomena.- 2016, vol. 240, s. 161-167
3. Effect of boundary conditions on the distribution of mode I fracture toughness along delamination front in CFRP laminates with general fiber orientation / Sylwester Samborski // Mechanics and Mechanical Engineering.- 2016, vol. 20, nr 2, s. 121-127 [MNiSW: 12]
4. Experimental verification of defecf’s influence on beams’ dynamics using laser scanning vibrometry / Sylwester Samborski // Solid State Phenomena.- 2016, vol. 240, s. 36-41
5. Local buckling, post-buckling and collapse of thin-walled channel section composite columns subjected to quasi-static compression / Hubert Dębski, Andrzej Teter, Tomasz Kubiak, Sylwester Samborski // Composite Structures.- 2016, vol. 136, s. 593-601 [MNiSW: 35]
6. Numerical analysis of the DCB test configuration applicability to mechanically coupled Fiber Reinforced Laminated Composite beams / Sylwester Samborski // Composite Structures.- 2016, vol. 152, s. 477-487 [MNiSW: 35]
Artykuły z 2015 (4)
1. A numerical-experimental study on da maged beams dynamics / Sylwester Samborski, Jakub Wieczorkiewicz, Rafał Rusinek // Eksploatacja i Niezawodność-Maintenance and Reliability.- 2015, vol. 17, nr 4, s. 624-631 [MNiSW: 20]
2. Experimental investigation of failure process in compressed channel-section GFRP laminate columns assisted with the acoustic emission method / Tomasz Kubiak, Sylwester Samborski, Andrzej Teter // Composite Structures.- 2015, vol. 133, s. 921-929 [MNiSW: 40]
3. Numerical strength analysis of the load-bearing frame of a palletizing robot’s universal head / Marek Chodurski, Hubert Dębski, Sylwester Samborski, Andrzej Teter // Eksploatacja i Niezawodność-Maintenance and Reliability.- 2015, vol. 17, nr 3, s. 374-378 [MNiSW: 20]
4. Regular and chaotic oscillations of a Timoshenko beam subjected to mechanical and thermal loadings / Anna Warmińska, Emil Manoach, Jerzy Warmiński, Sylwester Samborski // Continuum Mechanics and Thermodynamics.- 2015, vol. 27, nr 4-5, s. 719-737 [MNiSW: 30]
Artykuły z 2014 (3)
1. Analiza wytrzymałości masztu wirnika nośnego wiatrakowca metodą elementów skończonych / Łukasz Kłoda, Tomasz Łusiak, Sylwester Samborski // Prace Instytutu Lotnictwa.- 2014, vol. 236, nr 3, s. 49-57 [MNiSW: 4]
2. Modeling of delamination influence on mechanical characteristics of composite cantilever beam / Sylwester Samborski // Composites Theory and Practice.- 2014, nr 4, s. 177-182 [MNiSW: 8]
3. On buckling collapse and failure analysis of thin-walled composite lipped-channel columns subjected to uniaxial compression / Andrzej Teter, Hubert Dębski, Sylwester Samborski // Thin-Walled Structures.- 2014, vol. 85, s. 324-331 [MNiSW: 35]
Artykuły z 2013 (2)
1. Analiza wpływu zużycia szyny 49E1 na wartość wskaźnika wytrzymałości na zginanie / Jacek Caban, Leszek Gardyński, Sylwester Samborski // TTS Technika Transportu Szynowego.- 2013, nr 1, s. 57-60 [MNiSW: 4]
2. Dynamics of a laminated composite beam with delamination and inclusions / Emil Manoach, Jerzy Warmiński, Andrzej Mitura, Sylwester Samborski // The European Physical Journal Special Topics.- 2013, vol. 222, nr 7, s. 1649-1664 [MNiSW: 25]
Artykuły z 2012 (2)
1. Dynamics of a composite Timoshenko beam with delamination / Emil Manoach, Jerzy Warmiński, Andrzej Mitura, Sylwester Samborski // Mechanics Research Communications.- 2012, nr 46, s. 47-53
Artykuły z 2011 (1)
1. Vibration and damage detections of composite beams with defects / Emil Manoach, Andrzej Mitura, Sylwester Samborski, Jerzy Warmiński // Prace Instytutu Lotnictwa.- 2011, nr 218, s. 44-53
Artykuły z 2010 (1)
1. Dynamic Fracture Toughness of Porous Ceramics / Sylwester Samborski,Tomasz Sadowski // Journal of the American Ceramic Society.- 2010, vol. 93, nr 11, s. 3607-3609
Artykuły z 2008 (1)
1. Development of damage state in porous ceramics under compression / Tomasz Sadowski, Sylwester Samborski // Computational Materials Science.- 2008, vol. 43, nr 1, s. 75-81
Artykuły z 2007 (1)
Artykuły z 2005 (1)
1. Damage growth in porous ceramics / Tomasz Sadowski, Sylwester Samborski, Zdzisław Librant // Key Engineering Materials.- 2005, vol. 290, s. 86-93
Artykuły z 2004 (1)
1. O pewnej metodzie oceny własności mechanicznych porowatych materiałów ceramicznych / Sylwester Samborski, Tomasz Sadowski // Eksploatacja i Niezawodność-Maintenance and Reliability.- 2004, vol. 24, nr 4, s. 34-36
Artykuły z 2003 (2)
1. Modeling of Porous Ceramics Response to Compressive Loading / Tomasz Sadowski, Sylwester Samborski // Journal of the American Ceramic Society.- 2003, vol. 86, nr 12, s. 2218-2221
2. Prediction of the mechanical behaviour of porous ceramics using mesomechanical modelling / Tomasz Sadowski, Sylwester Samborski // Computational Materials Science.- 2003, vol. 28, nr 3-4, s. 512-517
Jeżeli ta strona zawiera nieaktualne, błędne lub niekompletne dane prosimy o kontakt pod adresem oab@pollub.pl