dr inż. Daniel Pietras
Dyscyplina:
inżynieria lądowa, geodezja i transport
Artykuły z 2023 (6)
1. A 3D Printing Method of Cement-Based FGM Composites Containing Granulated Cork, Polypropylene Fibres, and a Polyethylene Net Interlayer / Daniel Pietras, Wojciech Zbyszyński, Tomasz Sadowski // Materials.- 2023, vol. 16, nr 12, s. 1-20 [MNiSW: 140]
2. Carbon Fibre Reinforced Polymer Fatigue Strengthening of Old Steel Material / Maciej Kowal, Daniel Pietras // Advances in Science and Technology Research Journal.- 2023, vol. 17, nr 1, s. 197-209 [MNiSW: 100]
3. Composite Medical Tabletops Made of CFRP with Different Cross-Sections: Numerical Analysis and Laboratory Testing / Przemysław Golewski, Daniel Pietras, Tomasz Sadowski, Albin Michał Wit-Rusiecki // Materials.- 2023, vol. 16, nr 24, s. 1-20 [MNiSW: 140]
4. Data image correlation analysis of the destruction process of 3D printable layered beams subjected to the 3-point bending process / Wojciech Zbyszyński, Daniel Pietras, Tomasz Sadowski // Theoretical and Applied Fracture Mechanics.- 2023, vol. 125, s. 1-7 [MNiSW: 100]
5. Experimental Testing of Al-Si12/SiC Interpenetrating Composites (IPC) in Uniaxial Tension and Compression / D. Pietras, T. Sadowski, M. Boniecki, E. Postek // Archives of Metallurgy and Materials.- 2023, vol. 68, nr 1, s. 145-154 [MNiSW: 70]
6. Tensile and tear-type fracture toughness of gypsum material: Direct and indirect testing methods / Daniel Pietras, M.R.M. Aliha, Hadi G. Kucheki, Tomasz Sadowski // Journal of Rock Mechanics and Geotechnical Engineering.- 2023, vol. 15, nr 7, s. 1777-1796 [MNiSW: 200]
Artykuły z 2022 (2)
1. Bending degradation of thin-walled box beams made of aluminum omega profile and GFRP panel connected by mechanical fasteners / P. Golewski, M. Nowicki, T. Sadowski, D. Pietras // Composite Structures.- 2022, vol. 282, s. 1-13 [MNiSW: 140]
2. Impact of interpenetrating phase Al-Sil2/SiC / Eligiusz Postek, Tomasz Sadowski, Daniel Pietras // International Journal for Multiscale Computational Engineering.- 2022, vol. 20, nr 6, s. 61-78 [MNiSW: 40]
Artykuły z 2021 (7)
1. A Novel Approach by Spark Plasma Sintering to the Improvement of Mechanical Properties of Titanium Carbonitride-Reinforced Alumina Ceramics / Magdalena Szutkowska, Marcin Podsiadło, Tomasz Sadowski, Paweł Figiel, Marek Boniecki, Daniel Pietras, Tomasz Polczyk // Molecules.- 2021, vol. 26, nr 5, s. 1-16 [MNiSW: 140]
2. Crashworthiness performance of lightweight Composite Metallic Foams at high temperatures / Emanoil Linul, Daniel Pietras, Tomasz Sadowski, Liviu Marsavina, Dipen Kumar Rajak, Jaroslav Kovacik // Composites Part A: Applied Science and Manufacturing.- 2021, vol. 149, s. 1-11 [MNiSW: 140]
3. Determination of effective stiffness properties of multilayered composite beams / Mircea Bîrsan, Daniel Pietras, Tomasz Sadowski // Continuum Mechanics and Thermodynamics.- 2021, vol. 33, nr 4, s. 1781-1803 [MNiSW: 100]
4. Estimation of mechanical response of 2-phase oxide ceramic composites under high strain rate / Tomasz Sadowski, Daniel Pietras // Materials Today: Proceedings.- 2021, vol. 45, nr Pt 5, s. 4286-4291 [MNiSW: 5]
5. Experimental Study of Single-Lap, Hybrid Joints, Made of 3D Printed Polymer and Aluminium Adherends / Przemysław Golewski, Marek Nowicki, Tomasz Sadowski, Pietras Daniel // Materials.- 2021, vol. 14, nr 24, s. 1-22 [MNiSW: 140]
6. Mode III fracture toughness testing and numerical modeling for aerated autoclaved concrete using notch cylinder specimen subjected to torsion / Daniel Pietras, MRM Aliha, Tomasz Sadowski // Materials Today: Proceedings.- 2021, vol. 45, nr Pt 5, s. 4326-4329 [MNiSW: 5]
7. The influence of aging in salt chamber on strength of aluminum – CFRP single lap joints / Przemysław Golewski, Tomasz Sadowski, Daniel Pietras, Sylwia Dudzik // Materials Today: Proceedings.- 2021, vol. 45, nr Pt 5, s. 4264-4267 [MNiSW: 5]
Artykuły z 2020 (2)
1. Bending behavior of AM50 Magnesium alloy under static and dynamic loading / Sergiu Valentin Galatanu, Milena Scano, Daniel Pietras, Liviu Daniel Pirvulescu, Maria Cristina Porcu, Liviu Marsavina, Tomasz Sadowski // Procedia Structural Integrity.- 2020, vol. 26, s. 269-276 [MNiSW: 5]
2. Out-of-plane crushing response of aluminum honeycombs in-situ filled with graphene-reinforced polyurethane foam / Daniel Pietras, Emanoil Linul, Tomasz Sadowski, Alexis Rusinek // Composite Structures.- 2020, vol. 249, s. 1-18 [MNiSW: 140]
Artykuły z 2019 (3)
1. A numerical model for description of mechanical behaviour of a Functionally Graded Autoclaved Aerated Concrete created on the basis of experimental results for homogenous Autoclaved Aerated Concretes with different porosities / Daniel Pietras, Tomasz Sadowski // Construction and Building Materials.- 2019, vol. 204, s. 839-848 [MNiSW: 140]
2. Gradual degradation of a thin-walled aluminum adhesive joint with omega cross section under bending / Tomasz Sadowski, Marek Nowicki, Daniel Pietras, Przemysław Golewski // International Journal of Adhesion and Adhesives.- 2019, vol. 89, s. 72-81 [MNiSW: 100]
3. Influence of geometry, elasticity properties and boundary conditions on the Mode I purity in sandwich composites / V. N. Burlayenko, D.Pietras, T. Sadowski // Composite Structures.- 2019, vol. 223, s. 1-15 [MNiSW: 140]
Artykuły z 2018 (3)
1. Description of brittle behaviour of alumina/zirconia 2 phase ceramics / Tomasz Sadowski, Daniel Pietras, Liviu Marsavina, Eduard-Marius Craciun // IOP Conference Series : Materials Science and Engineering.- 2018, vol. 416, s. 1-8 [MNiSW: 15]
2. Impact of exploitation flaws on load capacity of tempered glass stairs assessed by numerical analysis with XFEM / Daniel Pietras, Tomasz Sadowski, Lidia Wójcik // IOP Conference Series : Materials Science and Engineering.- 2018, vol. 416, s. 1-7 [MNiSW: 15]
3. Parametric study of geometry effect on response to applied loadings of metallic honeycomb structures by virtual testing of mesoscale models / Daniel Pietras, Tomasz Sadowski // Archives of Metallurgy and Materials.- 2018, vol. 63, nr 2, s. 953-961 [MNiSW: 30]
Artykuły z 2017 (1)
1. Numerical modelling of hydraulically bonded mixture with rubber admixture due to applied mechanical loadings / Daniel Pietras, Tomasz Sadowski // Budownictwo i Architektura.- 2017, vol. 16, nr 3, s. 95-102 [MNiSW: 6]
Artykuły z 2016 (2)
1. Heat transfer process in jet turbine blade with functionally graded thermal barrier coating / Tomasz Sadowski, Daniel Pietras // Solid State Phenomena.- 2016, vol. 254, s. 170-175
2. The deformationpProcess of thin-walled box beams joined by rivets under three-point bending / Tomasz Sadowski, Marek Nowicki, Daniel Pietras, Przemysław Golewski // Solid State Phenomena.- 2016, vol. 254, s. 283-289
Artykuły z 2015 (2)
1. Analiza procesu odkształcenia cienkościennych belek skrzynkowych, łaczonych metodami, pod wpływem trójpunktowego zginania / Tomasz Sadowski, Marek Nowicki, Daniel Pietras, Przemysław Golewski // Rudy i Metale Nieżelazne.- 2015, vol. 60, nr 12, s. 694-699 [MNiSW: 8]
2. Multilayered and FGM structural elements under mechanical and thermal loads. Part I: Comparison of finite elements and analytical models / Tomasz Sadowski, Mircea Birsan, Daniel Pietras // Archives of Civil and Mechanical Engineering.- 2015, vol. 15, nr 4, s. 1180-1192 [MNiSW: 30]
Artykuły z 2014 (2)
1. Description of degradation process of rubberized lean concrete / Tomasz Sadowski, Daniel Pietras // Solid State Phenomena.- 2014, vol. 216, s. 67-72 [MNiSW: 10]
2. Estimation of thermal stress intensity factor in a strip with various property gradations subjected to thermal shock / Tomasz Sadowski, Daniel Pietras, Ivelin V. Ivanov // Key Engineering Materials.- 2014, vol. 601, s. 71-75 [MNiSW: 8]
Artykuły z 2013 (3)
1. Crack propagation in functionally graded strip under thermal shock / Ivelin V. Ivanov, Tomasz Sadowski, Daniel Pietras // The European Physical Journal Special Topics.- 2013, vol. 222, nr 7, s. 1587-1595 [MNiSW: 25]
2. Mechanical behavior of sandwich composite beams made of foams and functionally graded materials / Mircea Birsan, Tomasz Sadowski, Liviu Marsavina, Emanoil Linul, Daniel Pietras // International Journal of Solids and Structures.- 2013, vol. 50, nr 3-4, s. 519-530 [MNiSW: 35]
3. Thermoelastic deformations of cylindrical multi-layered shells using a direct approach / Mircea Birsan, Tomasz Sadowski, Daniel Pietras // Journal of Thermal Stresses.- 2013, vol. 36, nr 8, s. 749-789 [MNiSW: 20]
Artykuły z 2012 (1)
1. Deformation analysis of functionally graded beams by the direct approach / Mircea Birsan, Hans-Josef Altenbach, Tomasz Sadowski, Victor A Eremeyev, Daniel Pietras // Composites Part B-Engineering.- 2012, vol. 43, nr 3, s. 1315-1328
Jeżeli ta strona zawiera nieaktualne, błędne lub niekompletne dane prosimy o kontakt pod adresem oab@pollub.pl